fbpx
X
c2-2205a-iso
X
c2-2205a-front
X
c2-2205a-rear
c2-2205a-iso

[Discontinued] C2-2205A

Provides high quality scaling from Composite, S-Video (YC), YUV, YPbPr, RGB or DVI to analog RGB/YPbPr, DVI and HD/SD-SDI at virtually any resolution and refresh rate.

Manufacturer: tvONE
SKU: C2-2205A
Print

PRODUCT DISCONTINUED
This product has been discontinued. If you need this product for your project, please contact your sales representative.

C2-2205A Video Switcher/Scaler is based on TV One's exclusive CORIO®2 technology and provides high quality conversion from Composite, S-Video (YC), YUV, YPbPr, RGB or DVI to analog RGB/YPbPr and DVI at virtually any resolution and refresh rate. NTSC, PAL, PAL-M, PAL-N, SECAM input standards are supported. The C2-2205A provides an SD/HD-SDI Input.

Input Expansion is possible by using the optional S2 Series Input Expansion Switchers for SD/HD-SDI, DVI, RGB, YPbPr, YUV, Composite or YC. These units link to C2 unit via an OPTIONS Interconnect Cable and become an integral part of the main unit from a control and operational standpoint. The routing of these additional inputs is controlled directly from the control system of the C2 unit and multiple different S2 models may be simultaneously connected.

Basic Stereo Audio switching is provided by an integral 4x1 audio routing switcher. The four impedance-independent, unbalanced inputs follow the video input selection. A rear panel terminal block provides input and output access.

Advanced Stereo Audio is available via the optional S2-106AD Input Expansion Switcher, providing six differential audio inputs, which can be used for low impedance balanced or high impedance unbalanced sources. The user controls audio level, audio sampling frequencies and up to 999ms of adjustable audio delay independently for each input. The unit has numerous choices for audio I/O connectors, including a terminal block. The S2-106AD connects to the C2 unit via the OPTIONS interconnect cable and is then fully integrated into the control system of the host unit.

 

 

 Key Features of the C2-2200A Series

• Inputs: 2xCV, 2xYC, YUV/YPbPr, DVI-D
• SD/HD-SDI on models C2-2205A and C2-2255
• Outputs: DVI-I and Analog RGB/YPbPr (All units)
• Analog: PC to 2048x2048, HDTV to 1080p/60
• DVI: PC to 1920x1200, HDTV to 1080p/60
• Supports: NTSC, PAL, PAL-M, PAL-N, SECAM
• Motion Compensation & 3:2 Pulldown
• Temporal Interpolation & Diagonal Interpolation
• Automatic Incoming Resolution Detection
• 4:4:4 Full bandwidth Chroma Sampling
• Video signal parameter adjustments
• Integral 4x1 Stereo Audio Routing Switcher
• RS-232 and IP Interface & Windows Control Panel
• Variable Image Zoom to 10X and Shrink to 10%
• Mix, PIP, Chroma/Lumakey, Genolock & Edge Blending: C2-2250A & C2-2255A
• Optional IR Remote Control Unit
• Optional Single/Dual Rackmount Kit
• Optional Input Expansion with S2 Switchers

 

Ask about this product