fbpx
English English

For: C2-2100, C2-2100A, C2-2105, C2-2105A, C2-2150, C2-2150A, C2-2155, C2-2155A, C2-2200, C2-2200A, C2-2205, C2-2205A, C2-2250, C2-2250A, C2-2255, C2-2255A, C2-2350, C2-2350A, C2-2355, C2-2355A and C2-2450A

(Also see C2-2375A firmware updates)

Update can only be done via an RS232 cable and the program below.

Note: this software is not guaranteed to work on Windows Vista.

C2-2000A firmware version 368: c15_c2_2000a_v368.exe

Changes:
1. The HDCP code has been re-written for improved interoperability and to show more status messages, which should help diagnostics.
2. DVI inputs and outputs are now HDMI Audio 48kHz compatible (see HDMI input / output support).
3. Extra source diagnostic menu in 'System' menu to show incoming frequency and number of lines.
4. SDI inputs are now audio-enabled and can feed to a HDMI display.
5. Slight scaling error on right-edge of screen fixed.
6. Occasional YUV input error on C2-2000A fixed.
7. Improved ethernet reliability.


Firmware version 270 (C2-2450A is version 292):
C2-2000A firmware: c15_c2_2000a_v270_292.exe

Changes:
1. Added FrameLock - for more information on this feature please read Frame lock feature on CORIO2 units
2. Added Simple Edid Manager - for more information on this feature please read EDID manager in CORIO2 units


Firmware version 265:
C2-2000 firmware: c15_c2_2000_v265.exe

Changes:
1. Changed 'cut' transition code to freeze last image and wait until new source is ready.
2. Improved color-space conversion between BT.601 and BT.709 (SD / HD video resolutions).
3. HDCP input now defaults to On for C2-2000A units.
4. Improved black & color levels on all units.
5. Added black level control (0 or 7.5 IRE) for YUV inputs.
6. Fixed RS232 control of analog sync types.
7. Greatly improved motion compensation system.
8. Added support for 1080i YPbPr / SDI sources in motion compensation system.
9. Added noise reduction system for CV / YC / 1080i YPbPr inputs.
10. Added 'Frame / bob' method to de-interlacing system.
11. Added AMX Beacon to all units.
12. Added Aspect correct menu to allow for automatic aspect ratio correction - in Adjust sources.
13. Faster input source switching, especially for RGB/YUV inputs.

Please note:
1. The above is a self-extracting file which includes the firmware data file, plus the firmware programmer. You will need a serial cable (D9 plug to socket) and a spare COM / RS232 port on your computer.
2. If using the CC-300 with this unit, you must upgrade it to the latest firmware: CC-300 CORIOconsole firmware updates 3. It is not possible to upgrade the firmware for the C2-2000 or C2-2000A
via Ethernet.


C2-2000A Version 265: c15_c2_2000a_v265.exe

Changes since previous version:
1. Changed 'cut' transition code to freeze last image and wait until new source is ready.
2. Improved color-space conversion between BT.601 and BT.709 (SD / HD video resolutions).
3. HDCP input now defaults to On for C2-2000A units.
4. Improved black & color levels on all units.
5. Added black level control (0 or 7.5 IRE) for YUV inputs.
6. Fixed RS232 control of analog sync types.
7. Greatly improved motion compensation system.
8. Added support for 1080i YPbPr / SDI sources in motion compensation system.
9. Added noise reduction system for CV / YC / 1080i YPbPr inputs.
10. Added 'Frame / bob' method to de-interlacing system.
11. Added AMX Beacon to all units.
12. Added Aspect correct menu to allow for automatic aspect ratio correction - in Adjust sources.
13. Faster input source switching, especially for RGB/YUV inputs.


C2-2000A version 231: c15_c2_2000a_1.0.46_v231.exe

Changes since previous version:
1. Improved 1080i output quality.
2. Added HDCP for units with both DVI input and output - see HDCP additions to C2-2000A series.
3. Added Autoset sense level into System menu.
4. Added fast menu navigation system - multi-directional switch up/down moves to beginning/end of menu.
5. Analog RGB/YUV input now goes blue on source loss.
6. Updated EDID information - better compatibility with Macs.
7. Fixed issue where LCD would sometimes boot-up blank.


C2-2000 Version 185: c15_c2_2000_1.0.45_v185.exe

Changes since previous version:
1. Fixed problem where edge-blend setup would not be restored after power-up
2. Improved YPbPr HD output levels
3. Added S2-108HD support for C2-2000 series
4. Altered EDID for improved compatibility with some graphic cards
5. Added H/V Crop feature, to ease conversion of different aspect ratios
6. Added pixel-accurate selection of 'input' and 'output' window for specialized applications (set Aspect adjust to Pixel)
7. Added Presets to all units (some require 'Advanced menus' set to 'On' in System menu). Allows storage of 10 different Output/Window/Keyer settings.
8. Push special effect added to all units with overlay abilities.
9. Genlock and Lock&Mix are temporarily disabled when the lock source is removed or is not stable.
10. New RS232 function to indicate when a video source is lost.
11. Max fade level % added to all units with overlay abilities.
12. Diagonal interpolation added to all up-scalers with overlay abilities - improves de-interlacing of moving images.


C2-2000A Version 205: c15_c2_2000a_1.0.45_v205.exe
First release of firmware for 'A' version, including RGBHV input improvement.


C2-2000 Version 173: c15_c2_2000_1.0.45_v173.exe
1. Extra edge-blending option, providing 'side' adjustment where 2x2 (or more) blends are overlapped.
2. Improved edge-blending guide-lines - more accurate.
3. Made audio mute when in Standby mode on C2-1000/2000 units with built-in audio switching.
4. Corrected C2-2105 menu item to add in Lock H/V shift.
5. Increased button hold time for Factory Reset using RESTORE button to 5 seconds (was less than 1 second).
6. Wider range of gamma values now available in edge-blending mode (from 0.01 to 1.50in 0.01 steps).
7. Fixed bug where A2-2000 LED wouldn't go red in shutdown.
8. Changed menu-associated buttons (e.g. ZOOM on C2-1000) so that they only come on if at that menu AND adjusting.
9. Changed adjusting routine so that brackets stop flashing (i.e. can no longer adjust) after 20 seconds of inactivity.
10. Added menu item for 'Aspect change'.
11. Added in menu item for units with RGB input but no m.comp to allow selection between 'Normal' and 'Auto' De-int for 1080i input.
12. CC-300 buttons are now programmable from the C2 scaler it's attached to.
13. Backlight on units with LCD can now be disabled.
14. Added support for more S2 units.
15. Added 'On source loss' to 'Adjust sources' menu, so that user can define what should happen when a source is lost. Default is blue screen. This replaces the 'De-glitch' menu item in 'Adjust windows'. Added to / altered resolution database file. Interlaced resolutions now show as field rate and not frame rate. (e.g. 1920x1080i 29.97Hz now shows as 1920x1080i 59.94Hz.) Sync type (analog on C2-7000 series) is now stored with each resolution, with HD resolutions defaulting to tlYUV.
16. Increased allowable jitter for CV/YC inputs - fixes issue with VHS inputs on C2-1000/2000 units.
17. Added automatic foreground / background swap on C2-2250/2255. If KEY is active when PIP is not, then swap is set 'on'. Turns off if KEY is de-activated.
18. Added 'legalizer' for units with SDI output - prevents excursions beyond 'legal' Y & C values.
19. Improved black-level clamping for HD component input / output.
20. C2-2105, C2-2155, C2-2355 locking to CV improved.
21. Made all down-convertors default to 90% size, when shrink is off.


Version 146: c15_c2_2000_1.0.45_v146.exe
1. Added 'E.blnd compensation' option to boost minimum brightness level in non-overlap area. This compensates for most projectors' inability to output true black.
2. Fixed issue where CC-300 initial connection might cause problems.
3. Added support for more S2 units.
4. Fixed CC-300 issue where negative numbers were not always allowed for.
5. Fixed CC-300 issue where blanking button did not always blank the correct output.
6. Improved motion compensation - better sensitivity to fast motion.
7. Eliminated occasional pixel sparkle when shrinking CV/YC video to low size on high resolution output.
8. Added 'RGB1 termination' option in System menu for units with PC/HD Loop output.


Version 120: c15_c2_2000_1.0.44_v120.exe
1. Can now lock to a 525i/625i YUV / YPbPr source - but requires that source is clean and jitter free.
2. Added advanced field swap / line offset adjustment to Adjust source (set Advanced menus = On)
3. Changed description of some inputs to more closely match the physical connector type.
4. Fixed bug where tlYUV setting for HD outputs did not restore on power-up if saved.
5. Stopped non-overlay units reacting to MODE button on infra-red remote control.
6. Addition of 'Adjust transitions' menu item & transitions to Overlay-capable units (those ending 50 and 55).
7. Increased maximum transition time to 999.9 seconds and improved transition time accuracy.
8. Now compatible with S2-105PC, S2-105PCA, S2-106AD, S2-105DVIA.


Version 104: c15_c2_2000_1.0.44_v104.exe
(First public release.)