Video and Audio UTP Transmitter with local output for MultiView or MONDO Signal Extension Systems Magenta Research
Inputs |
|
Outputs |
|
Control Options | RS-232 |
Status | End of Life |
Warranty | 5 |
Number of Inputs | 1 |
Number of Outputs | 1 |
Cable Type | Cat.5e/Cat.6/Cat 6a |
Cable Length | see RX |
Resolution | up to 1920x1200 |
Audio | yes |
EOL NOTICE
The 2620016-04 Multiview II XRTx -A/-S, -SAP has been scheduled for End of Life. If you require this product for your project, please contact your sales representative.
A key building block in the MultiView video over UTP range, the improved MultiView II XRTx transmitter is available in every configuration (-A/-S and –SAP) and can be paired with any component in the MultiView system, including all receivers, distribution amplifiers and matrix switchers.
When used with the appropriate receivers, the XRTx delivers the world’s longest UTP extension capability at the highest resolution—1920x1200 at 2000ft/609m.
New functionality includes improved sync technology—making 1080p (and higher) video replication easier to replicate than ever before)—and a more-user friendly configuration interface, as virtually any necessary adjustments to an XRTx can now be done externally.
Functionality | |||||
---|---|---|---|---|---|
-A | -S | -232 | -SA | -SAP | |
Video In | HD15-F | HD15-F | HD15-F | HD15-F | HD15-F |
Video Out | HD15-F | HD15-F | HD15-F | HD15-F | HD15-F |
Audio In | 4-pin Phoenix | - | - | 4-pin Phoenix | 4-pin Phoenix |
Audio Out | - | - | - | - | - |
Serial In | 4-pin Phoenix
(replace audio-in)
|
4-pin Phoenix | DB9F | DB9F | DB9F |
Serial Out | - | - | - | - | - |
UTP In | - | - | - | - | - |
UTP Out | RJ-45 | RJ-45 | RJ-45 | RJ-45 | RJ-45 |
General Specifications | |||||
Video Support | All VESA modes to WUXGA (1920x1200), RGBHV, RGB Composite (NTSC, PAL, SECAM), S-Video, Component Video Widescreen Modes, HDTV Modes including 1080p, 1080i & 720p | ||||
Resolution / Refresh Rate | MultiView Receiver Dependent | ||||
Required Source Impedence | Video Out: 75 Ohms; Audio Out (if applicable) 600 Ohms maximum; SPDIF Audio models: 75 Ohms |
||||
Required Destination Impedence | Video In: 75 Ohms; Audio In (If applicable) 600 Ohms maximum; SPDIF Audio models: 75 Ohms |
||||
-A | -S | -232 | -SA | -SAP | |
Audio Support | Left/Right Summed Audio 47K ohms input impedance. |
- | - | Stereo Audio 10K ohms input impedance. A source device with 600 ohms maximum output impedance is recommended. |
Stereo Audio 10K ohms input impedance. A source device with 600 ohms maximum output impedance is recommended. |
Serial Support | - | Simplex-serial, any speed up to 115.2K baud. Transparent to format and protocol. | Any speed up to 115.2K baud (depending on application). Transparent to format and protocol. | Speed fixed at 9600 baud. Transparent to format and protocol. | Speed is adjustable in 9 steps from 1200 to 115.2K baud; format is fixed to 8 data no parity; transparent to protocol. |
Cable Supported | Category 5, 5e and 6 Shielded Twisted-Pair (STP) or Unshielded Twisted-Pair (UTP), low-skew preferred or skew-free cable. Please see the "Recommended UTP" page for more detailed information. |
||||
Cascading Capability | Yes, Video Only | ||||
Compliance | CE; FCC Class A, IC Class A, I.T.E. Device, RoHS | ||||
Power | +5 VDC @ 1.2 Amps max., Consumption: 6 Watts Maximum |
||||
Temperature Tolerance | Operating: 32 to 104°F (0 to-40°C) Storage: -4 to 140°F (-20 to 60°C) | ||||
Humidity Tolerance | Up to 80% Non-Condensing | ||||
Mounting | Rack Mount Standard/Wall Mount Optional | ||||
Enclosure | Steel, Black Powder-Coat Finish | ||||
Size | 1.2"H x 4.2"W x 4.3"D (3.1 x 10.4 x 10.9 cm) | ||||
Weight | 0.6 pound (0.27 kg) | ||||
Skew Compensation | 1.0 pound (0.45 kg) | ||||
Key Features of the MultiView II XRTx Video and Audio UTP Transmitter
Brochures
Extend & Distribute Brochure (US)
Extend & Distribute Brochure (EU)
Multiview II XRTx-A Brochure (PDF)
Manual
Multiview II XRTx-A Manual (PDF)
CAD Drawings
Quick Start Guides
Multiview XRTX Quick Start Guide