[Discontinued] C2-2255A
Provides versatile scaling, conversion and switching power for nearly any combination of analog and/or digital video inputs/outputs including SDI signals.
Category: Legacy Products
Manufacturer: tvONE
SKU: C2-2255A
PRODUCT DISCONTINUED
This product has been discontinued. If you need this product for your project, please contact your sales representative.
C2-2255A Video Switcher/Scaler provides high quality video conversion from Composite, S-Video (YC), YUV, YPbPr, RGB or DVI to analog RGB/YPbPr and DVI at virtually any resolution and refresh rate. NTSC, PAL, PAL-M, PAL-N, SECAM input standards are supported. HD/SD/SDI input is supported as well.
Input Expansion is possible by using the optional S2 Series Input Expansion Switchers for SD/HD-SDI, DVI, RGB, YPbPr, YUV, Composite or YC. These units link to C2 unit via an OPTIONS Interconnect Cable and become an integral part of the main unit from a control and operational standpoint. The routing of these additional inputs is controlled directly from the control system of the C2 unit and multiple different S2 models may be simultaneously connected.
Basic Stereo Audio switching is provided by an integral 4x1 audio routing switcher. The four impedance-independent, unbalanced inputs follow the video input selection. A rear panel terminal block provides input and output access.
Key Features of the C2-2255A
• Supports: NTSC, PAL, PAL-M, PAL-N, SECAM
• Motion Compensation & 3:2 Pulldown
• Temporal Interpolation & Diagonal Interpolation
• Automatic Incoming Resolution Detection
• 4:4:4 Full bandwidth Chroma Sampling
• Video signal parameter adjustments
• Integral 4x1 Stereo Audio Routing Switcher
• RS-232 and IP Interface & Windows Control Panel
• Variable Image Zoom to 10X and Shrink to 10%
• Mix, PIP, Chroma/Lumakey, Genolock & Edge Blending
• Optional IR Remote Control Unit
• Optional Single/Dual Rackmount Kit
• Optional Input Expansion with S2 Switchers
Related Products
Provides high quality bi-directional conversion between a variety of analog and digital video formats. Versatile features include Picture-in-picture, keying, logo insertion and Auto-Switching.
The C2-2755 provides high quality bi-directional conversion and switching between a wide variety of analog and digital video formats including Auto-Switching.
C2-2655 Scan Converter Plus supports HDMI, DVI, Composite Video, YC, YUV, YPbPr or RGB, on both inputs and outputs, and SD/HD/3G-SDI on output only. Source selection is simplified with Auto-Switching.
Category:
Audio Products
Input Expansion ports adds 5 DVI-D ports with Stereo Audio to C2 Series Switchers
Category:
Legacy Products
Stereo audio power amplifier that provides 10 watts RMS per channel into a 4 ohm load when signals from a pre-amplified source are provided as inputs.
Category:
Legacy Products
Provides high quality scaling from Composite, S-Video (YC), YUV, YPbPr, RGB or DVI to analog RGB/YPbPr, DVI and HD/SD-SDI at virtually any resolution and refresh rate.
Category:
Legacy Products
The best possible scaling and conversion of Composite, S-Video (YC), YUV, YPbPr, RGB or DVI to analog RGB/YPbPr and DVI at virtually any resolution and refresh rate.
Category:
Legacy Products
Provides high quality conversion from Composite, S-Video (YC), YUV, YPbPr, RGB or DVI to analog RGB/YPbPr and DVI-D at virtually any resolution and refresh rate. It Also provides PiP, Keying and projector Edge Blending.